Solar kit Camper flexible panel 100W + gel battery 12V

Solar Kit Camper flexible panel 110W  + 12V gel battery structure and accessories manufacter warranty +34 680 630 525

Solar kit Camper consisting of a 100W monocrystalline semi-flexible solar panel, regulator with a charging current of up to 10 Amps, 12V gel battery, automatic and intelligent separator relay, battery protector with automatic regulation at 12 / 24V, includes structure with cable gland, RVK cable suitable for humid environments and immersion in water, an MC4 (pair) that establishes the connection between solar panels in parallel, midi fuse, midi fuse holder, cylindrical fuse with a working current of up to 10 Amps and capacity 30kA interrupter, cylindrical fuse holder with IP20 waterproof protection and also has an adhesive for universal mounting that includes a TACK that allows high adhesion and hold of up to 100kg per square meter.

Specific characteristics of 100W solar panel

-Solar panel power 100W
-Monocrystalline type cell
-Number of cells 32
-Weight of solar panel 2.4 kg
-Solar plate dimensions 940 X 670 mm
-Maximum power voltage of 17.2V (VMPP)
-Maximum power current 5.39A (IMPP)
-Open circuit voltage 20.04V (VOC)
-Short circuit current 6.2A (ISC)
-Voltage 12V
-ETFE material

Regulator specific characteristics

-Charging current up to 10 Amps
-PV voltage up to 75V
-Nominal battery setting at 12, 24V (auto)
-Ultrafast Maximum Power Point Tracking (MPPT)
-Advanced detection of the Maximum Power Point in case of partial cloudiness
-Conversion efficiency 98%
-Programmable flexible charging algorithm
-Extensive electronic protection
-Over-temperature protection and derating
-Protection of short circuit and reverse polarity in PV panels.
-FV reverse current protection.
-Internal temperature sensor that compensates for absorption and float charge voltage
-Optional Battery Sense Sensor for external battery voltage and temperature via Bluetooth
-Down battery recovery function up to 0V
-Data connection through VE.Direct

Gel Battery Specific Features

-Battery voltage 12V
-Battery capacity up to 100Ah
-Battery life of up to 12 years
-Insert type M8
-VRLA technology
-Low self discharge
-Product weight 26 kg
-Product dimensions 350 × 167 × 183 mm

Specific characteristics automatic and intelligent isolating relay

-Connect batteries in parallel
-Smart control
-Long bolts that allow the connection of more than one power cord
-Protection against overheating
-Voltage sensor and bidirectional supply of both batteries

Battery saver specific features

-Disconnect battery charges
-Unidirectional device
-Continuous current 65 Amps
-Low consumption
-Automatic regulation at 12 / 24V
-MUSFET switches
-M6 connection
-Alarm output delay 12 second
-Charge reconnection delay of 30 seconds
-Product dimension 40 x 48 x 106 mm
-Weight of the product 200 g

Specific characteristics of the structure with cable glands

-Six point support
-Cable glands with cable glands to place a solar panel on the roof
-Suitable for motorhome, van or other type of surface that allows installation by mounting adhesive

Specific characteristics of RVK cable

-Length of 10 meters
-Maximum nominal voltage 0.6 / 1 KV.
-High flexibility facilitates installation process
-The standardized identification, according to HD 308, is by color.
-Maximum temperature 90º.
-Construction according to standard UNE 21.123.
-Suitable for humid environments and immersion in water
-Cross linked polyethylene (XLPE) insulation allows power transmission
-Resistance to overloads
-Pvc protection (against mineral oils and hydrocarbons)
-Annealed electrolytic copper conductor, class 5 according to IEC 60228.

MC4 Specific Features

-Solar panel connector
-Multi-contact type
-Type of connection between panels parallel

Cylindrical fuse specific characteristics

-GPV cartridge fuse
-Interrupting capacity 30kA
-Working current up to 10A
-Working voltage of 1kV DC
-Cylindrical fuse class, made of industrialized ceramic
-Fuse size 10.3mm x38mm
-Material of copper contactor
-Use for photovoltaic module
-Silver contactor cover

Cylindrical fuse holder specific characteristics

-Use for cylindrical fuses
-DIN mounting
-Maximum current of 32A
-Working voltage of 1Kv DC
-Number of poles 1
-Waterproof protection IP20
-Operating temperature between -20 and 70 degrees

Specific characteristics of the adhesive for universal mounting

-Adhesive component based on MS of hybrid polymer
-Suitable for outdoor and indoor
-Contains TACK that allows high adhesion (hold up to 100kg / m2)
-Allows you not to use nails or screws in cladding work
-Resistance to mechanical fatigue and weathering.
-High UV stability.
-Resistant to temperatures from -40ºC to 90ºC.
-Great long-term elasticity, even at low temperatures.

Package content
X1 Monocrystalline semi-flexible solar panel 100W 
X1 MPPT Smart Regulator
X1 Smart Battery Protector
X1 Cyrix-CT smart isolator relay
X1 Gel battery 12V / 100Ah
X1 Structure with cable gland for 1 module
X1 RVK 10 meter cable
X1 Pair of MC4
X1 Cylindrical fuse 8A
X1 Cylindrical fuse holder base PMX
X2 Midi fuse holder base 60A
X2 Midi fuse
X1 MS Absolute Adhesive

If you have any questions, you can contact us at info@tienda24hs.com or via WhatsApp at +34 680 630 525