Solar kit camper panel 200W Munchen + gel battery 12V

Camper solar kit 200W monocrystalline plate + 12V gel battery structure and accessories manufacturer warranty +34 680 630 525

Camper solar kit consisting of a 200W monocrystalline solar panel, smart regulator with a charging current of up to 10 Amps, 12V gel battery, inverter / charger with a 12V voltage, automatic and intelligent isolating relay, battery protector with automatically regulated at 12 / 24V, includes structure with cable gland, RVK cable suitable for humid environments and immersion in water, an MC4 (pair) that establishes the connection between solar panels in parallel, midi fuse, mega fuses, mega fuse holder, midi fuses, cylindrical fuse with a working current of up to 10 Amps and interrupting capacity of 30kA, holder for cylindrical fuse with an IP20 waterproof protection and also has an adhesive for universal mounting that includes a TACK that allows a high adhesion and clamping of up to 100kg per square meter.

Specific characteristics of 200W solar panel

-Monocrystalline plate type
-Number of solar panel cells 72
-Power rating of the board 200W
-Maximum power voltage 38.71 V (VMPP)
-Maximum power current 5.17 A (IMPP)
-Open circuit voltage 45.2 V (VOC)
-Short circuit current 5.53 A (ISC)
-Weight of the product 15 kg
-Product dimensions 1580 x 808 x 40 mm

Regulator specific characteristics

-Charging current up to 10 Amps
-PV voltage up to 75V
-Nominal battery setting at 12, 24V (auto)
-Bluetooth Smart integrated
-Ultrafast Maximum Power Point Tracking (MPPT)
-Advanced detection of the Maximum Power Point in case of partial cloudiness
-98% conversion efficiency
-Programmable flexible charging algorithm
-Extensive electronic protection
-Over-temperature protection and derating
-Protection of short circuit and reverse polarity in PV panels.
-FV reverse current protection.
-Internal temperature sensor that compensates for absorption and float charge voltage
-Optional Battery Sense Sensor for external battery voltage and temperature via Bluetooth
-Down battery recovery function up to 0V
-Data connection through VE.Direct

Gel Battery Specific Features

-Battery voltage 12V
-Battery capacity up to 180Ah
-Insert type M8
-VRLA technology
-Low self discharge
-Product weight 44 kg
-High strength ABS housing
-Product dimensions 484 x 171 x 241 mm
-Does not need maintenance

Inverter Charger Specific Features

-Inverter Voltage 12V
-Weight Inverter 6.4 kg
-Inverter dimensions 360 x 240 x 100 mm
-Maximum efficiency 92%
-Protection class IP21
-Input Voltage 12V
-Rated Output Power (W) 800 VA
-Output Power 800 VA
-Peak Power (W) 1600W
-Output AC Voltage / Frequency 230 VAC ± 2% / 50 Hz ± 0.1%
-Pure Wave Type
-Guarantee 5 years

Specific characteristics automatic and intelligent isolating relay

-Connect batteries in parallel
-Smart control
-Long bolts that allow the connection of more than one power cable
-Protection against overheating
-Voltage sensor and bidirectional supply of both batteries

Battery saver specific features

-Disconnect battery charges
-Unidirectional device
-65 Amps continuous current
-Low consumption
-Automatic regulation at 12 / 24V
-MUSFET switches
-M6 connection
-12 second alarm output delay
-Charge reconnection delay of 30 seconds
-Product dimension 40 x 48 x 106 mm
-Weight of the product 200 g

Specific characteristics of the structure with cable glands

-Six point support
-Cable glands with cable glands to place a solar panel on the roof
-Suitable for motorhome, van or other type of surface that allows installation by mounting adhesive

Specific characteristics of RVK cable

-Length of 10 meters
-Maximum nominal voltage 0.6 / 1 KV.
-High flexibility facilitates installation process
-The standardized identification, according to HD 308, is by color.
-Maximum temperature 90º.
-Construction according to standard UNE 21.123.
-Suitable for humid environments and immersion in water
-Cross linked polyethylene (XLPE) insulation allows power transmission
-Resistance to overloads
-Pvc protection (against mineral oils and hydrocarbons)
-Annealed electrolytic copper conductor, class 5 according to IEC 60228.

MC4 Specific Features

-Solar panel connector
-Multi-contact type
-Type of connection between panels parallel

Cylindrical fuse specific characteristics

-GPV cartridge fuse
-Interrupting capacity 30kA 
-Working current up to 10A
-Working voltage of 1kV DC
-Cylindrical fuse class, made of industrialized ceramic
-Fuse size 10.3mm x38mm
-Material of copper contactor
-Use for photovoltaic module
-Silver contactor cover

Cylindrical fuse holder specific characteristics

-Use for cylindrical fuses
-DIN mounting
-Maximum current of 32A
-Working voltage of 1Kv DC
-Number of poles 1
-IP20 waterproof protection
-Operating temperature between -20 and 70 degrees

Specific characteristics of the adhesive for universal mounting

-Adhesive component based on MS of hybrid polymer
-Suitable for outdoor and indoor
-Contains TACK that allows high adhesion (hold up to 100kg / m2)
-Allows you not to use nails or screws in cladding work
-Resistance to mechanical fatigue and weathering.
-High UV stability.
-Resistant to temperatures from -40ºC to 90ºC.
-Great long-term elasticity, even at low temperatures.

Package content
X1 Solar panel 200W monocrystalline
X1 MPPT Smart Regulator
X1 Inverter/Charger
X1 Smart Battery Protector
X1 Cyrix-CT smart isolator relay
X1 Gel battery 12V/180Ah
X1 Structure with cable gland for 1 module
X1 RVK 10 meter cable
X1 RVK 3 meter cable
X1 Pair of MC4
X1 Cylindrical fuse 10A
X1 Cylindrical fuse holder base PMX
X2 Midi fuse holder base
X1 Mega Fuse 125A
X1 Fuse holder base
X2 Midi fuse 60A
X1 MS Absolute Adhesive
X4 Tubular terminals

If you have any questions, you can contact us at info@tienda24hs.com or via WhatsApp at +34 680 630 525