Specifications
1,Wireless signal Repeater
2,automatic alarm detector
3,alarm Wireless signal Repeater
4,Wireless triggered sensor
1,Study (code matching)
Press the “Study” button, transmitter turns into the coding status, the LED becomes orange, then trigger the accessories that need to be studied such as sensors, infrared detectors, if the LED flash 3 times shows the study is successful, the LED will flash once if the accessory has been studied already. Press the “Study” button to exit.
2,Delete Study
Keep pressing “Study” button for 3 seconds, the LED turns red and quickly flash 3 times, the transmitter has deleted all the studied accessories.
3,Add Study
If you need to study new accessories, operate it like part one-Study.
5.1 Wireless signal transmission
A. “Mode” port disconnected: only transmit the signal of the studied accessories, the LED turns red when transmitting signal.
B. “Mode” port connected: can transmit any
Wireless signal that have the same receive frequency with the transmitter, the LED turns red when transmitting signal.
5.2 Wired signal transmission
Transmitting the signal from wired port need to study this transmitter into the alarm host first: when the alarm host in study status, connect the “line In” port for a short time. The LED turns red when transmitting signal.
5,Technical Parameters
Work Voltage: DC 12V
Static Current: 10mA
Work Current: 180mA
Study Capacity: 30 pcs
Receive Distance: 100m
Transmit Distance: 200-500m