Dji Matrice 200 series v2. Ocusync system up to 8km

"PRICE TO CONSULT. FOR MORE INFO CALL 902263000 OR SEND A MAIL TO INFO@TIENDA24HS.COM"

Dji Matrice 200 series v2 designed for new applications such as security, rescue, construction, infrastructure, energy efficiency, forensic investigation, security, thermal inspections, photogrammetry and many more functions. New Ocusync 2.0 transmission system with 2 real-time band frequencies with a range of up to 8 km away.

The Timesync system maintains all of the drone's devices such as the flight controller, camera, GPS module, RTK module, and on-board payloads or accessories.

Possibility to completely turn off all the lights on the arms and rear to carry out operations with the aircraft in a discreet way.

Obstacle detection thanks to its flightautonomy system with front, bottom and top sensors allowing precise hovering in complete safety. Thanks to their upper and lower anti-collision beacons they are visible at night in low light, making work easier in areas with difficult access.

Possibility of mounting the following cameras from the Zenmuse range: XT2, X7, X4S, X5S, Z30, XT and third party loads.

Thanks to Airsense technology and its integrated ADS-B receiver, it improves security in airspace by offering real-time information about nearby airplanes and helicopters.

Enjoy precision centimeter precision with the D-RTK 2 mobile station that supports global real-time satellite navigation systems.

Connect any compatible payload to the top of your M210 V2 and M210 RTK V2 and collect data from another perspective, improving positioning accuracy with an external GPS module.

Thanks to the TimeSync feature, third-party payloads can have their positioning data centered to the center of the stabilizer connector, allowing for accurate geotagging.

Develop custom SDK mobile applications to make flight planning and on-site data collection tasks simpler, faster, and more easily repeatable.

Technical and comparative characteristics

Dimensions Unfolded, with propellers and landing gear: 883 × 886 × 398 mm Folded, without propellers or landing gear: 722 × 247 × 242 mm

Diagonal wheelbase 643 mm

Weight Approx 4.69 kg (with two TB55 batteries)

Max Weight Takeoff 6.14 kg

Max load 1.45 kg

Operating frequency 2.4000-2.4835 GHz; 5,725-5,850 GHz PIRE 2.4 GHz: ≤ 26 dBm (FCC); ≤ 20 dBm (CE) 5.8 GHz: ≤ 26 dBm (FCC); ≤ 14 dBm (CE)

Hovering Accuracy (P-Mode, with GPS) Vertical: ± 0.5m (1.64ft) or ± 0.1m (0.33ft, Active Bottom View System) Horizontal: ± 1.5m (4.92ft) or ± 0.3m (0.98 feet, active lower vision system

Max Angular Speed Inclination: 300º / s Turn: 120º / s

Maximum angle of inclination

S mode: 35º

P mode: 30 ° (Front view system activated: 25 °)

Mode A: 30 °

Max speed rising 5 m / s (16.4 ft / s)

Max speed Down (vertical) 3 m / s (9.8 ft / s)

Max speed S mode / A mode: 81 km / h (50.3 mph) P mode: 61.2 km / h (38 mph)

Max Height operating above sea level 3,000 m (9,842 ft, with 1760S propellers)

Max wind resistance 12 m / s (39.4 ft / s)

Max flight time (with two TB55 batteries) 38 min (without payload) 24 min (takeoff weight: 6.14 kg)

Compatible DJI Stabilizers Zenmuse X4S / X5S / X7 / XT / XT2 / Z30

Possible stabilizer configurations

Single bottom stabilizer

Ingress IP43 protection

GNSS GPS + GLONASS

Operating temperature -20 ° C to 50 ° C (-4 ° F to 122 ° F)

 Package content

1 x DJI Matrice 200 V2 Body

1 x remote control

1 x CrystalSky 7.85 "Monitor

1 x WCH2 HUB Charger

1 x HUB IN2CH Charger

2 x WB37 Smart Battery

2 x TB50-M200 Intelligent Flight Battery

1 x Battery Charger

8 x Propellers

1 x 16GB MicroSD Card

1 x carrying case