Interior Texecom alarm pir detector cov

Detector Alarm PIR Internal Grade 2 Texecom 12 EN50131-2-2 temperature compensating meters.

You can download the data sheet from the manufacturer that is the end.
 

Product Description
The Premier Compact IR models are designed to detect
Movement intruder and activate an alarm control panel. the product
Must be connected to a compatible control unit with alarm
Theft from those specified well or a power source
Be within a range of output voltage from 9 to 15 VDC and
Provide a minimum of 4 hours of power in standby mode.

Installation Instructions
The technology used in these detectors withstand risks of false alarms.
However, to avoid possible causes of instability,
• Direct sunlight on the detector.
• Heat sources within the field of view of the detector.
• strong air currents in the detector.
• Darken the detector field of view with large objects, for
Example furniture. Not suitable for outdoor use.

Installing the Detector
1. Unscrew the detector base to loosen; keep
Screw in the product.
2. Lift the detector from the base and remove the hooks of the party
Superior.
3. Secure the base to the wall about 1.5 m - 3.1 m (4.1 to 10 feet) from the ceiling. for
Carry out the assembly on a flat surface, use a minimum of 2
Screws (DIN 7998).
4. Set the mounting height by adjusting the position of the PCB.
5. Wire the detector. For connection
Double pole (bridges unused).
For a double-end connection line (DEOL)
6. Select the most suitable position for bridges. For more information, see the section on 'the
Configuring the bridge.
7. For applications which assembly should be performed on the roof and need
Coverage of 90 °, use the optional swivel mount (number
Part: AFU-0005).
8. Replace the cover and tighten the screw to the base