Termovelocimetrico detector. Homologator by Aenor and Miner.
The design DN40C heat detector or fire alarm DN40CP indicate to reach its threshold temperature or sudden elevation of the same specification of the UNE 23007 Part 5.
Detector Termovelocimetrico AENOR and approved by MINER.
It operates through a pair of thermistors. One is exposed to room temperature, while the other is integrated into the SMD circuit.
Not included docking station.
Constructive features
White ABS thermoplastic elements
Electronic Components approved
electrical characteristics
Supply voltage: 12Vdc to 30Vdc
Consumption Sleep: 15uA 24V +/- 5% and 25
Consumption in alarm: 30mA +/- ImA Rp470 0hm
remote pilot Maximum current: <100 mA
Number of detectors per zone: 20
Working temperature: -10 ° C to 70 ° C
Storage temperature: -10 to 80
Maximum relative humidity: 95%
Mechanical characteristics
Dimensions: 48 D100x
Approximate weight: 90g
Protection index: IPP205
Borne: terminal strip marked
Cable section: 1.5mm2
Installation tube: D20
Posts polarization
Fixing plug: S5
Fixing screw: 3.5x 25
termovelocimétrico two-wire detector, detector termovelocimétrico Cyrtek, termovelocimétrico detector, CNPTM100, Cyrtek nile PBA, Cyrtek