Magnetic contact FLUSH plastic alarm or other security. Cylindrical diameter 10 mm.

Dimensions:
Side Sensor
Hole for installation: 10mm
High Sensor: 17,48mm
Visible side diameter: 12,05mm
Inside diameter of 9,55mm to 9,92mm

Magnet side:
Hole for installation: 10mm
High Sensor: 17,48mm
Visible side diameter: 12,05mm
Inside diameter of 9,55mm to 9,92mm

Recessed magnetic contact 10  mm Ø, plastic, separation distance (GAP) ≥ 14 ≤ 25

side sensor wire

18.04 mm long
Hole diameter: 10 mm
11.80 mm outer diameter

Iman

Length 14.16 mm
Hole diameter: 10 mm
11.80 mm outer diameter

Half-power magnetic contact to surface, plastic, screw connection, separation distance (GAP) ≥ 15 ≤ 45

Contact powerful magnetic base, aluminum, separation distance (GAP) ≥ 60 ≤ 70

Vibration Detector (EN50131 grade 2)

- Vibration Detector
- Sensitivity adjustment by potentiometer
- Programmable alarm relay, locked or autoreset
- LED programmable as alarm indicator
- Supports remote reset signal
- Tamper Protection
- Power supply: 8V ~ 15V DC
- Power consumption: 9 mA (idle) - 11 mA (alarm)
- Operating temperature: -10 ° C ~ +70 ° C
- Degree of protection: IP43
- Complies with EN-50131 Grade 2

and we are eager to assist you to give fast and accuratesolution to your inquietud.www.store24hr.com.

LAPA for safe
Fully adaptable to almost all security systems market.
Protection element security safes,
attempts at forced opening.
Includes three levels of protection, useful within
of 3 meters.
1. Pyrometer temperature heat detector active
above 70 ° against sabotage attempts by
using thermal lances.
Two. Element active seismic vibration detector to
forced opening attempts, blows, etc..
Three. Safety Equipment Self-Protection by
and magnetic tamper.

FEATURES:
THE 2013019 is a sensor for doors and windows that can be installed
doors, windows and any other object that is opened and closed. Sensor
transmits signals to the console when a separation between the two
pieces forming the sensor since one senses the separation of
Magnetic mounted on another part of the sensor. Protection
Tamper leading inside ensures that attempts to sabotage
to move the contact will result in activation of the alarm.


INSTALLATION AND ALERTS
- Open the case and remove the plastic tab to activate the battery.
- Mount the sensor in the door frame and the magnet on the door.
- Make sure the switch is on the right side of the transmitter.
- Place the transmitter in the desired position, mount the magnetic
not separated by more than 1 cm from the transmitter and the transmitter to ensure
the switch with a double-sided tape or screws.
- Avoid installing the sensor in areas with a lot of metal or
electrical wiring as a boiler or laundry room.

Connect to the console (pairing):
Press the security code default-1234 - and then the key
connection of the console below 9 -, and then press the button
inside the sensor tamper or "force" an alert simulating
separation of the parts. When you hear a beep, be connected.
If you hear two beeps is that was previously associated
To check if connected properly, connect the system and
activate the sensor again, if there is an alarm, the connection is correct.

SPECIFICATIONS
Feedstream
Feeder 1.5 V (1.5 V 1 battery AA LR6)
Static Current
≤ 40 mA
Remote transmitter
≤ 80 m (open area)
RF
MHz/433 315 MHz (± 75 kHz)
Cover Material
Plastic ABS
Operating temperature
-10 º C ~ 55 º C
Relative Humidity
≤ 80% (no condensation)
Transmitter dimensions
71 x 34 x 17.5 mm
Dimensions of the magnetic
51 x 12 x 13.5 mm

Detector radio contact for MICRA system (just for systems micra
)

Video Manufacturer products are in all languages.
 

 

Details of the material
- Magnetic contact via radio to MICRA Satel ® system
- 2 reed switches for easy installation
- Terminals for connecting an external detector
- Protection against sabotage
- Power supply: lithium battery CR123A
- Dimensions: 24 x 110 x 27 mm

Carbon Monoxide Detector-way radio

- Carbon Monoxide Detector-way radio
- Controls the presence of CO in a continuous
- Generates an audible alarm (85 dB) and signal to the PBX, todetect accumulations of CO
- Built-in self-test included, with manual test button
- Meets UL 2034 standard
- Includes 2 3V lithium batteries

This video is merely illustrative and products are in the languages ​​for each country

To tell from outside Spain Call 00 34 931820019

and we are eager to assist you to give fast and accuratesolution to your inquietud.www.store24hr.com.